The NFC consisting device Samsung Galaxy S Advance I9070P gets an Official XXLPF Android 4.1.2 Jelly Bean Update. This update is especially for Italy users only. As this is an official update, so you can directly grab from Samsung Kies or you can update directly by following this post. You can download XXLPF Android 4.1.2 Update for Galaxy S Advance I9070P and simply flash it via the Odin flashing tool.
Today, in this article I will show you the way to install official XXLPF Android 4.1.2 Update for Galaxy S Advance I9070P with complete steps. So, firstly, you have to read the whole post carefully and then only you have performed it on your device.
1. Get and install Samsung S Advance USB drivers on your PC.
2. Enable USB debugging. (All apps > Settings > Manage Applications > Development > USB Debugging – check box)
3. Charge your battery upto 70 – 80%.
Method to install update :
Step 1: Download the below requirements files to install update for Galaxy S Advance I9070P.
- Firmware File
Step 2: Extract both the file on the desktop.
Step 3: Locate the Odin.exe from the extracted folder and open it.
Step 4: Now, switch off your device and boot in to download by combination of “Volume Up + Home + Power” button together. Press Volume up to enter into download mode.
Step 5: Connect your device to Computer via USB cable. It will be automatically detected by Odin and also ID:CON in Odin will glows blue color. Means your device is successfully added and now you can perform the process.
Step 6: Select the appropriate files as defined below to install update for device.
- Click the PDA button and select the .tar.md5 file
- Click the Phone button and select file with Modem in its name
- Click the CSC button and select the file with CSC in its name
- Click the PIT button and select the .pit file
(If you don’t find ‘Phone’, ‘CSC’ or ‘PIT’ files then don’t hesitate because it depends on region and firmware, just follow the procedure like a normal process. Ignore other files.)
Step 7: Please make sure that only F. Reset Time and Auto Reboot options are checked on Odin.
Step 8: Click on the “START” button to begin rooting process.
Step 9: As all the process gets over, you will get “PASS” message in Odin and phone will reboot automatically.
Hurray! Now your device is running on Android 4.1.2 Jelly Bean. So, this is the easiest guide on how to install jelly bean update for Galaxy S Advance I9070P. In case, if you face any problem then do report us via the below comments section.